NCD series III

NCD series magnetizing/demagnetizing power:

NCD large capacitance type magnetizer/demagnetizer

NCD series large capacity magnetizing/demagnetizing power source is is a large capacitance, high energy, capacitive discharge magnetizer capable of saturating Alnico, Ceramic and Rare Earth magnetic materials, it is a development of our own. After 20 years R & D, now it has grown as an all-round system, with charging voltage ranging from 1100v, 1500v to 2000v, 2500v, they are not only a good choice for magnetizing small sized magnetic materials, motors, but also good for OD/ID magnetization on big sized magnetic products of high-performance and multi-poles magnetizing of high energy Samarium Cobalt and Neodymium magnets and magnet assemblies, applicable for a power supply of 220v, 50Hz; besides, it features long service life, low-cost, etc.

One of the remarkable advantages for this series magnetizer is about its intelligent quantitative magnetizing power source, with computer control and inspection technology, it can quantitatively magnetize, demagnetize or decrease the magnetism of magnetic close looped piece accurately, guarantee the property consistency for the magnetized products, especially suitable for magnetic materials or motors that feature big property dispersion and exacting consistency requirement after magnetization It can keep an accurate control over the field intensity for magnetization, magnet residual can be kept at less than 0.002T after accurate demagnetizing.

Large capacitance type magnetizer/demagnetizerThis type can be used in saturating and anti-saturating permanent magnets simply by switching. This series of magnetizer/demagnetizer is used phase modulation technology and constant current charging. They are favorably suitable for magnetizing and demagnetizing magnets with high coercive force materials, such as rare-earth, motors, large loudspeakers and all magnet materials available today.

The magnetizer is error proof even at output short circuit conditions.

Specifications:

Model NCD1100/1.5
-48
NCD1100/1.5
-48T
NCD1100/2.5
-96
NCD1100/2.5
-96T
NCD1100/4
-192
NCD1100/4
-192T
NCD1100/5-384
NCD1100/5-384T
NCD1100/5-384n
NCD1100/5-384nT
Power source AC220V,50-60 Hz,40A AC380V,50-60 Hz,40A
Max. output current 15000A 25000A 40000A 50000A 50000A
Charging time 3 second 5 second 9 second 20 second
Output voltage 50-1100V (continuously variable)
Capacitance 4800µF 9600µF 19200µF 38400µF 38400nµF
Max. output energy 2904J 5808J 11616J 23232J 23232nJ
Main control element SCR
Dimension (W×D×H) 600×650×1600 600×800×2000 (600×2)×800×2000 600×(n+1)×800×2000
Weight
(KG)
Approx. 200 Approx. 260 Approx. 400 Approx. 900 Approx. (300+600n)

NCD series: NCD I / NCD II / NCD III / NCD IV / NCD V
YX Magnetizing Power: YX I / YX II / YX III / YX IV